Conceptronic C54APRA2+ Manuale Utente Scaricare il pdf (Pagina 6)

www.conceptronic.net

Slave(s) access point

To enter the configuration page of the C54APM you need to set a fixed IP-address.

Click Start -> Run

Type ncpa.cpl and click OK

Right click on Local Area Connection (Windows 2000) or LAN connection (Windows XP)

and select Properties

Select Internet Protocol (TCP/IP) and click Properties

Select Use the following IP-address

Fill in the following values:

IP address: 10.0.0.10

Subnet mask: 255.0.0.0

Click OK -> OK

Go to http://10.0.0.1 and login in with username admin and password admin

4. Click Basic settings

5. Select as mode Station-

Infrastructure

6. Click Apply

7. Click Continue

8. Click Select Site Survey

9. Select the correct Access

Point for example

Conceptronic and click

Connect

10. Click Apply

11. Click Apply

When the C54APM is rebooted you can remove the fixed IP-address of the computer.

Click Start -> Run

Type ncpa.cpl and click OK

Right click on Local Area Connection (Windows 2000) or LAN connection (Windows XP)

and select Properties

Select Internet Protocol (TCP/IP) and click Properties

Select Obtain an IP-address automatically

Click OK -> OK

You should now receive an IP-address from the C54APRA2+/C54APRB2+

6/10

1 2 3 4 5 6 7 8

Nessun commento

Conceptronic C54APRA2+ Manuale Utente Pagina 6